|
|
|
|
| |
Promotes Safety &
Performance
|
 Jennison & Wright is the
leading supplier of top quality Laminated Hickory Pecan Press Pit
Flooring for the metal stamping and automotive industry. For many
decades, Anderson Tully Company (ATCO) was the largest premier
manufacturer of Laminated Hickory Pecan Press Pit Panels. In 2001
Jennison & Wright purchased their Press Pit Floor Panel
product line. With this added production and increased customer base,
Jennison
& Wright is able to offer competitive pricing from our large
inventory.
Hickory Pecan Press Pit Panels can be delivered with short lead times
at maximum value. Several stock sizes including 30" x 30" x 3-3/4"
thick are in stock for immediate shipment and savings. Available
in Clear
Polyurethane or Black Seal Coat Finish.
We manufacture Laminated Hickory Pecan flooring block in: thickness
from 3” to 6” and widths from 12" to 36", and lengths from 12" to
60". Contact us today for a stock list.
|
Laminated Hickory Pecan Press Pit Panel
Floor Block
Specifications
• Laminated Pecan Hickory Press Pit Floor Blocks are fabricated using
the methods and components listed below.
• Panels are constructed of Hickory Pecan lumber, using 8/4, 6/4, 5/4,
4/4 thickness. No splices are allowed in either the thickness or length
of finished panel. Lumber is Kiln dried to 8% moisture content prior to
manufacturer.
• Adhesive is straight urea resin type in accordance with requirements
of FS MMM-A-188C and will develop sheer strength at joint of 2800
P.S.I. Panels are clamped together with controlled pressure and tied
securely with 1/2" diameter steel bolts 6" from each end. Conforming to
SAEJ429 and ASTM A 563. Bolts in panel will be perpendicular to the
span and bolt heads are countersunk.
• After adhesive has set, blocks are to be machined to within the
following tolerances:
| Length |
+ or -
1/32" |
|
|
| Width |
+ or - 1/16" |
|
|
| Thickness |
+ or - 1/16" |
|
|
• Blocks are coating with one of the following;
| a. |
Black
Seal Coat |
|
| b. |
Polyurethane |
|
| c. |
or
other approved coating |
|
• Finished panels shall be free of warpage, excessive shrinkage or
swelling, delamination, splitting, or checking of wood members.
Blocks are to be palletized for forklift unloading so as to expedite
handling.
• No Silicone products are used in the manufacturing of floor panels.
For more information contact us now. |
| |
| Back to top |
|
|
